Atlantik Systeme presents BR-400AN 802.11a/b/g/n Mesh WLAN converter from Silex
Planegg, August 7th, 2019
Atlantik Systeme, value-added distributor in the field of network components, presents the new BR-400AN 802.11 a/b/g/n Mesh WLAN converter from Silex.
The BR-400AN supports IEEE802.11 making it easier to construct a mesh network at a low cost compared with the traditional mechanism. The mesh network automatically reconfigures the communication route according to the installation environment. Approx 1 sec of network configuration time, mesh proves effective in transmitting data in factory and office environment.
This 802.11a/b/g/n mesh WLAN converter automatically establishes a wireless LAN between devices. Silex's Wi-FI Mesh Bridge offers your business a financial and operational benefit by enterprise level security to provide protection to your systems and data. This level of added security can be used in both infrastructure and peer to peer modes.
BR-400AN supports the RSTP (Rapid Spanning Tree Protocol). AMC Mesh nettwork can suppress loop network, and it enables fast convergence. Automatic recovery time up to 6 sec, when backbone is down. It also helps in easy area expansion with backup just by placing the bridge where they are needed. It does not require AP but can horizontally expand the area.
BR-400AN is designed to communicate in the 2.4 GHz and 5 GHz bands. The wired LAN port supports 10/100/1000BASE-T. At 130Mbps data rate, it takes only 7ms for a round-trip. It supports two operation modes, Mesh point mode & Access point mode.
Also it supports enterprise-class security including WPA2, 802.1x authentication, SSID Stealth and MAC address filtering function.
Up to 32 units constitutes to make one mesh network group, with the maximum of 5 hops. Data is transmitted farthest by overlapping hops, connecting data with multiple stages and multiple routes.
Two modes of operation are available in BR-400AN depending on the application environment: Mesh Point Mode is when a bridge is connected to another bridge. Up to 8 units can be connected. Mesh Access Point Mode is when a device is connected to a bridge to access. Up to 100 units can be connected.
Our mission is to provide our customers with excellent service, at every interaction, tailored to their profiles and their industry. Please contact us!